Sending A First-Class Mail Envelope; Sending A Large First-Class® Envelope - Pitney Bowes SendPro C Lite Operator's Manual

5. Tap Refill Mail Postage.
6. Tap View Receipt to view or print a receipt.
7. Tap Done.
8. Your updated postage balance appears on the Envelope Printing or Print on Envelopes screen.

Sending a First-Class mail envelope

First class mail is an economical way to send mailpieces through the USPS. You can send standard
postcards, letters and large envelopes and small packages up to 15.99 ounces.
1. Tap Envelope Printing or Print on Envelopes on the Home screen.
2. If you have the accounting feature enabled, tap Account and select an account.If your device's
model number is 8H00 or 9H00 and if you have only a single account, once you select that account
the device will remember that account the next time you start Envelope Printing or Print on
Envelopes.
3. Tap Class.
4. Tap Start Over to show a list of all the available classes.
5. Tap First-Class Retail Metered for a First-Class mail envelope.
6. Tap Letter.
7. Select any special services you wish to use.
8. Tap Apply.
9. Place the envelope on the scale. The weight appears in the weight button on the screen.
10. Place the envelope or envelopes on the feed deck. Depending on the SendPro C model you have,
feed the envelopes manually or tap Start to feed the envelopes.
Note:Your device will upload transactions if you have previously printed any mail. Once the upload
completes, you see the message "Transaction upload status, Upload success" with a check mark. Tap
the check mark.
Sending a large First-Class® envelope
Before you select a rate for a large envelope or flat, you need to determine whether the mailpiece you are
sending is a letter or flat (large envelope) according to the USPS.
Pitney Bowes Operator Guide February 2021
Printing on envelopes
118