Installing The Sendpro C Lite, Sendpro C, Sendpro - Pitney Bowes SendPro C Lite Operator's Manual

Managing your device

Installing the SendPro C Lite, SendPro C, SendPro+

If you are installing a SendPro C Lite, SendPro C, SendPro+ for the very first time, follow these
instructions.
1. Before you begin
2. Open the box
3. Unpack the device
4. Install the printhead
5. Install the ink cartridge
6. Connect device to a power source
7. Continue installation steps
Before you begin
Before you being installing your new SendPro C Lite, SendPro C, SendPro+, you need to decide how
you are going to pay for postage and what type of connection (wired or wireless) you wish to use.
Set Up your Postage Payment Method
Pitney Bowes offers different options to pay for postage for mailing and shipping. You must set up how
you are going to pay for postage before you can use your device. Visit
pitneybowes.com/us/support/postage/paying-for-postage.html
Choose your connection type
Wired
Takes about 10 minutes
Requires an available internet jack and power outlet
Wireless
Takes about 15 minutes
Requires access to a wireless network and power outlet
Pitney Bowes Operator Guide February 2021
for more information.
71