ILX Lightwave MPS-8033 Series User Manual page 80

MODE:Watt?
Parameters
Response
Notes
Examples
MODE?
Parameters
Response
Notes
Examples
*OPC
Operation Complete
Action
Response
Example
7/01
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The MODE:Watt? query returns the status of the DISPLAY mode with regard to the mW scale.
None.
The response of 1 means the mW scale is selected, and 0 means the mW scale is not selected.
In local operation, the status of the mW display mode is determined by visualizing the mW LED indi−
cator.
When the output is off the 'setpoint' or desired power is displayed. When the output is turned on the
actual measured power is displayed.
"MODE:WATT?" response: 1, means the linear display mode is selected.
"MODE:W?" response: 0, means the linear display mode is not selected.
The MODE? query responds with the units of display.
None.
The response is a string of up to three bytes that represent the display units.
MW linear (mW) display is selected
DBM log (dBm) relative to 1 mW is selected
DB log (dB) relative to the user defined reference
In local operation, the status of the display mode is determined by visualizing the display LED indi−
=cators.
When the output is off the 'setpoint' or desired power is displayed. When the output is turned on the
actual measured power is displayed.
"MODE?" response: DBM, means the dBm display mode is selected.
Sets the operation complete bit in the Event Status Register when all pending overlapped
commands have been completed.
None.
*OPC
C O M M A N D R E F E R E N C E
GPIB Command Reference
C
D
F
C
D
F
C
D
F
4
C H A P T E R
OMMON
D
EVICE EPENDENT
P
RONT ANEL
OMMON
D
EVICE EPENDENT
P
RONT ANEL
OMMON
D
EVICE EPENDENT
P
RONT ANEL
63
MPS-8033 !