ILX Lightwave MPS-8033 Series User Manual page 71

C O M M A N D R E F E R E N C E
4
C H A P T E R
GPIB Command Reference
LASer:DEC
Parameters
Notes
Examples
LASer:INC
Parameters
Notes
Examples
LASer:MODulation:
The following commands can be reached directly from the LASer:MODulation command path.
54
! MPS-8033
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The LASer:DEC command decrements the laser output power by the preset STEP value.
None.
The step size may be edited via the LASer:STEP command. The default step size is .001 mW or
.001 dB. The step size can be queried via the LASer:STEP? command.
The step size for the linear and log scales are kept separately. No conversion is done between
display scales.
"LAS:DEC" action: Decrements the output power by the amount of the step size for the
present display mode.
The LASer:INC command increments the laser output power by the preset STEP value.
None.
The step size may be edited via the LASer:STEP command. The default step size is .001 mW or
.001 dB. The step size can be queried via the LASer:STEP? command.
The step size for the linear and log scales are kept separately. No conversion is done between
display scales.
"LAS:INC" action: Increments the output power by the amount of the step size for the present
display mode.
The LASer:MODulation: command path is used to get to the MPS−8033's laser modulation control
commands.
LASer:MODulation:CW
LASer:MODulation:FREQ
LASer:MODulation:FREQ?
LASer:MODulation?
C
OMMON
D D
EVICE EPENDENT
F P
RONT ANEL
C
OMMON
D D
EVICE EPENDENT
F P
RONT ANEL
C
OMMON
D D
EVICE EPENDENT
F P
RONT ANEL