ILX Lightwave MPS-8033 Series User Manual page 73

C O M M A N D R E F E R E N C E
4
C H A P T E R
GPIB Command Reference
LASer:MODulation:FREQ?
Parameters
Response
Notes
Examples
LASer:MODulation?
Parameters
Response
Notes
Examples
LASer:OUTput
Parameters
Notes
Examples
56
! MPS-8033
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The LASer:MODulation:FREQ? query returns the value of the internal modulation frequency.
None.
The response data is internal modulation frequency in Hertz.
This command has the same effect as viewing the INT MODULATION indicators on the 8033 front
panel.
If the 8033 is operating in the CW mode and the LAS:MOD:FREQ? query is issued the response is
"0 HZ".
"LAS:MOD:FREQ?"response: 270 HZ, indicates the 8033 is operating in the 270 Hz pulse
modulation mode.
The LASer:MOD? query returns the modulation mode.
None.
The response data is the modulation mode (CW 160 Hz to 15 kHz).
This command has the same effect as viewing the MODE LEDs on the 8033 front panel.
"LAS:MOD?" response: 1000 HZ, indicates the 8033 is operating in the 1000 Hz pulse modulation
mode.
"LAS:MOD?" response: CW, indicates the 8033 is operating in the continuous wave mode.
The LASer:OUTput command turns the laser output on or off.
The <nrf value> is 0 = OFF, and 1 = ON. Substitute values are shown in Table 3.4.
This command has the same effect as pressing the (OUTPUT) ON switch on the 8033 front panel.
Following the LAS:OUT ON command a two second delay period begins (indicated by the
(OUTPUT) ON LED flashing). After the delay the laser will be turned on and the output on LED will
become fully illuminated. Use the LAS:OUT? command to query the output status.
The LASer:OUTput OFF command is executed immediately.
"LAS:OUT ON" action: Starts the laser output on sequence. The output will be enabled two
seconds after issue of the command.
"LAS:OUTPUT 1" action: Starts the laser output on sequence. The output will be enabled two
seconds after issue of the command.
"LAS:OUT OFF" action: Turns the laser output off.
C
OMMON
D D
EVICE EPENDENT
F P
RONT ANEL
C
OMMON
D D
EVICE EPENDENT
F P
RONT ANEL
C
OMMON
D D
EVICE EPENDENT
F P
RONT ANEL