ILX Lightwave MPS-8033 Series User Manual page 57

C O M M A N D R E F E R E N C E
4
C H A P T E R
Notes about Syntax
Table 4.1 Command Reference
Name
LAS:POW
LAS:POW?
LAS:REF
LAS:REF?
LAS:STEP
LAS:STEP?
MES
MES?
MODE:DB
MODE:DB?
MODE:DBM
MODE:DBM?
MODE:W
MODE:W?
MODE?
*OPC
*OPC?
*PRE
*PRE?
*PSC
*PSC?
*PUD
*PUD?
*RST
SECURE
*SRE
*SRE?
*STB?
TERM
TERM?
TIME?
TIMER?
*TST?
*WAI
40
! MPS-8033
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Parameters
Expected Function
1 Used to set the optical output power.
NONE Returns the output power in the selected display units.
1 Used to set the reference power for dB mode.
NONE Returns the reference power in the display units.
1 Used to set the DEC/INC step size.
NONE Returns the step size in the selected display.
1 Used to enter a string of 16 ASCII bytes.
NONE Returns a previously stored ASCII message.
NONE Commands the display units to dB.
NONE Returns 1 if the display mode is dB.
NONE Commands the display units to dBm.
NONE Returns 1 if the display mode is dBm.
NONE Commands the display units to mW.
NONE Returns 1 if the display mode is mW.
NONE Returns the display units.
Causes the 8033 to generate the OPERATION COMPLETE message in
the Standard Event Status Register when all pending overlapped
commands have been completed.
Places an ASCII character 1 into the 8033's Output Queue when all
pending operations have been finished.
Sets the parallel poll register enable bits.
Determine the contents of the PARALLEL POLL ENABLE REGISTER.
Used to avoid any undesirable service requests when the 8033 is
powered up.
Queries the 8033's power−on−status−clear flag.
Stores data unique to the 8033.
Retrieves the contents of the *PUD storage area.
Performs a device reset.
1 Used by service personnel to access to protected data.
Sets the Service Request Enable Register bits to allow the 8033 to
generate the user−selectable service requests.
Determine the current contents of the Service Request Enable Register.
Reads the Status Byte.
1 Sets the program message terminator.
NONE Returns the program message terminator.
NONE Returns the elapsed time since last powered up.
NONE Returns the elapsed time since the timer was last reset.
Initiates an internal self−test and returns a response when complete.
Prevents the 8033 from executing any further commands until the No−
Operation−Pending flag is true.