Remote Operation; Table 3.1 Ieee-488 Interface Specification Gpib Capability - ILX Lightwave MPS-8033 Series User Manual

! ! ! !
GPIB (General Purpose Interface Bus) is the common name for ANSI/IEEE Standard 488.2 1987,
an industry standard for interconnecting test instruments in a system. Everything you can do from
the front panel can also be done remotely, and in some cases, with more flexibility.
In remote operating mode, the 8033 offers all of the features accessible from the front panel.
Additional features are available only via GPIB such as the STEP command which increments or
decrements the optical power output by a user defined 'step' value. Five digits of resolution are
available via GPIB whereas only four digits are shown on the front panel.
The MPS−8033 with the optional model 1231 complies with the IEEE 488.2/1987 standard to the
extent shown in Table 3.1.
Table 3.1 IEEE−488 Interface Specification GPIB Capability
SH1 Source Handshake − complete compatibility
AH1 Acceptor Handshake − complete capability
T6 Talker Functions
L4 Listener Functions
SR1 Service Request − complete capability
RL1 Remote Local Function − complete capability
PP0 Remote Configuration Parallel Poll − no capability
DC1 Device Clear − complete capability
DT0 Device Trigger − no capability
C0 Controller Function − no capability
E1, E2 Three−state bus drivers with automatic switch to open collector during
Parallel Poll
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
R
! ! ! ! !
C H A P T E R
O
EMOTE PERATION
! ! ! ! !
3
! ! ! !
17
MPS-8033
!