Remote Interface Messages; Remote Messages; Non-Supported Remote Interface Messages; Table 3.6 8033 Allowable Gpib Interface Messages - ILX Lightwave MPS-8033 Series User Manual

Remote Interface Messages

The following sections are intended as a reference for using the 8033 with the GPIB option when an
understanding of the lower level interface messages is required. These sections deal with the
remote interface messages which are available with the 8033, and they contain a list of the Interface
Function subsets. This information is generally not required by the user unless there is a question of
compatibility of the 8033 with a specific controller. A list of interface messages which are not
supported by the 8033 is shown in Table 3.7 on page 35. These messages are ignored by the 8033.
The interface messages listed in this chapter are handled by the Texas Instruments 9914 GPIB
interface IC and the 80C188 microprocessor in the 8033, and are transparent to the higher level
commands. However, they may be explicitly used in some GPIB programs. A list of the 8033's
allowable interface messages is shown in Table 3.6.

Remote Messages

The following list contains GPIB remote messages which are compatible with the 8033 GPIB driver.

Table 3.6 8033 Allowable GPIB Interface Messages

ACG
ATN
DAB
DAC
DAV
DCL
END

Non-Supported Remote Interface Messages

Table 3.7 contains GPIB interface messages which are known to be incompatible with the 8033.
Table 3.7 Non−Supported Interface Messages for the 8033
EOS
GET
7/01
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
GTL OTA PPR3
IDY PCG PPR4
IFC PPC PPR5
LAG PPE PPR6
LLO PPD PPR7
MLA PPR1 PPR8
MTA PPR2 PPU
MSA NUL
OSA TCT
R E M O T E O P E R A T I O N
Command Timing
REN SRQ
RFD STB
RQS TAG
SCG UCG
SDC UNL
SPD UNT
SPE
3
C H A P T E R
35
MPS-8033 !