Mounting Options; Rack Mounting Netvanta 5305; Figure 8. Rack Mounting The Netvanta 5305 - ADTRAN NetVanta 5305 Hardware Installation Manual

Hide thumbs Also See for NetVanta 5305:

Table of Contents

NetVanta 5305 Hardware Installation Guide

Mounting Options

The NetVanta 5305 may be installed in a 19-inch or 23-inch rackmount configuration. The following sections

provide step-by-step instructions for rack mounting.

The NetVanta 5305 can be rack mounted in a 19-inch equipment rack using the mounting kit included with

the shipment. Rackmount adapter kits (P/N 1200775L1) can be purchased separately for installation in a

standard 23-inch rack. Follow these steps to mount the NetVanta 5305 into the equipment rack:

Step

Attach the rackmount ears to the NetVanta 5305 chassis.

To allow proper grounding, scrape the paint from the rack around the mounting holes where the

NetVanta 5305 will be positioned.

Position the NetVanta 5305 in a stationary equipment rack.

Have an assistant hold the unit in position as you install two mounting bolts through the unit's

brackets and into the equipment rack using a #2 Phillips-head screwdriver.

Proceed to the steps given in the

61200990L1-34N

Instructions for Rack Mounting NetVanta 5305

Installing Modules on page

Action

28.

Unit Installation

Table of Contents