Confirmation Of Conversion Characteristic - Mitsubishi Electric Melsec Q Series User Manual

5 UTILITY PACKAGE (GX Configurator-AD)

5.6.4 Confirmation of Conversion Characteristic

5 - 25
[Purpose]
The converted value of digital-analog conversion can be confirmed according to
the tilt of the graph, based on the offset/gain setting.
[Operating procedure]
Monitor/test screen
[Setting screen]
[Explanation of items]
(1) Items displayed on the screen
I/O characteristic diagram: Displays the I/O conversion characteristic to the
prepared offset/gain setting.
(2) Setting details
Analog/Range setting
Analog:
Range setting: Make selection from "Normal resolution" or "High
Offset/Gain setting
Offset value:
Gain value:
Offset/gain setting
Select the type of the analog signal input (voltage or
current).
resolution".
For digital input values and maximum resolution of the
normal resolution mode and high resolution mode, refer to
the POINT(2) in this section.
Enter an offset value to display the I/O characteristic
diagram.
Enter a gain value to display the I/O characteristic diagram.
MELSEC-Q
Conversion characteristic
5 - 25