Mitsubishi Electric Melsec Q Series User Manual page 125

7 ONLINE MODULE CHANGE
7 - 6
(3) Mounting of new module
(a) Mount a new module to the same slot and install the terminal block.
(b) After mounting the module, click the [Execution] button and make sure that
the "RUN" LED is lit. Module READY (X0) remains off.
(4) Operation check
(a) To make an operation check, click the [Cancel] button to cancel control
resumption.
(b) Click the [OK] button to leave the "Online module change" mode.
MELSEC-Q
7 - 6