Mitsubishi Electric Melsec Q Series User Manual page 89

5 UTILITY PACKAGE (GX Configurator-AD)
5 - 16
(2) Command buttons
Make text file
End setup
Cancel
POINT
The auto refresh settings are stored in an intelligent function module parameter file.
After being written to the CPU module, the auto refresh setting takes effect by
either (1) or (2).
(1) Turn the RUN/STOP switch of the CPU module: STOP
RUN.
(2) After the RUN/STOP switch is set to RUN, turn off and then on the power or
reset the CPU module.
The auto refresh settings cannot be changed from sequence programs. However,
processing equivalent to auto refresh can be added using the FROM/TO instruction
in the sequence program.
Creates a file containing the screen data in text file format.
Saves the setting data and ends the operation.
Cancels the setting and ends the operation.
MELSEC-Q
RUN STOP
5 - 16