Mitsubishi Electric Melsec Q Series User Manual page 85

5 UTILITY PACKAGE (GX Configurator-AD)
5 - 12
(2) Command buttons
Common operations to the <<Intelligent function module parameter>> tab and
<<FB support parameter>> tab
Deletes the initial setting and auto refresh setting of the selected
Delete
module.
However, if initial setting and auto refresh setting have been
prepared and the cell of "initial setting" or "auto refresh" is
selected and executed, only the setting of the selected cell is
deleted.
Exit Closes this screen.
When the <<FB support parameter>> tab is selected
<<Parameter
When the <<Intelligent Function Module Parameter>> tab is selected
FB parameter>>
(3) Menu bar
(a) File menu
Intelligent function module parameters of the project opened by GX
Developer are handled.
[Open parameters]:
[Close parameters]:
[Save parameters]:
[Delete parameters]:
[Open FB support parameters]: Opens the FB support parameter file.
[Save as FB support parameters]: Saves the FB support parameter file.
[Exit]:
(b) Online menu
[Monitor/Test]:
[Read from PLC]:
[Write to PLC]:
Moves the setting of the selected line to the <<Intelligent
function module parameter>> tab.
Moves the setting of the selected line to the <<FB support
parameter>> tab.
Reads a parameter file.
Closes the parameter file. If any data are
modified, a dialog asking for file saving will
appear.
Saves the parameter file.
Deletes the parameter file.
Closes this screen.
Activates the Select monitor/test module screen.
Reads intelligent function module parameters from the
CPU module.
Writes intelligent function module parameters to the
CPU module.
MELSEC-Q
5 - 12