Error Code (Buffer Memory Address 19: Un\G19); Setting Range (Buffer Memory Address 20, 21: Un\G20, Un\G21) - Mitsubishi Electric Melsec Q Series User Manual

3 SPECIFICATIONS

3.4.9 Error code (buffer memory address 19: Un\G19)

3.4.10 Setting range (buffer memory address 20, 21: Un\G20, Un\G21)

3 - 30
(1) The error codes generated by the A/D converter modules are stored here.
(2) Refer to Section 8.1 for the details of Error code.
(1) These areas are used to confirm Setting range of the A/D converter module.
(2) The setting values for CH1 to CH4 are stored in Setting range (CH1 to CH4)
(buffer memory address 20: Un\G20) and setting values for CH5 to CH8 are
stored in Setting range (CH5 to CH8) (buffer memory address 21: Un\G21).
For the Q64AD module, Setting range (CH5 to CH8) (buffer memory address 21:
Un\G21) is invalid.
b15 to b12
Un\G20
CH4
Un\G21
CH8
The setting values are as follows.
Input range
4 to 20 mA
0 to 20 mA
1 to 5 V
0 to 5 V
–10 to 10 V
0 to 10 V
User range setting
(3) Default setting is 0
When the setting for the Q68ADV is 0
0 to 10V.
(When the setting is 5
POINT
The input range cannot be changed by using Setting range (buffer memory address
20, 21: Un\G20, Un\G21).
For changing the input range, perform by the intelligent function module switch
setting. (Refer to Section 4.5.)
b11 to b8 b7 to b4 b3 to b0
CH3 CH2 CH1
CH7 CH6 CH5
Setting value
0
H
1
H
2
H
3
H
4
H
5
H
F
H
.
H
, the analog input range operates between
H
, the analog input range will be the same as above.)
H
MELSEC-Q
3 - 30