5
UTILITY PACKAGE (GX Configurator-AD)
5.6 Monitoring /Test
5.6.1 Monitor/test screen
5 - 17
[Purpose]
Buffer memory monitoring/testing, I/O signals monitoring/testing, operating condition
setting, offset/gain settings (refer to Section 5.6.2, 5.6.3), pass data (refer to Section
5.6.5, 5.6.6) are started from this screen.
[Operating procedure]
"Select monitor/test module" screen
"Module model name"
1: Enter the start I/O No. in hexadecimal.
The screen can also be started from System monitor of GX Developer
Version 6 or later.
Refer to the GX Developer Operating Manual for details.
[Setting screen]
X/Y monitor/test
"Start I/O No.
Monitor/test
MELSEC-Q
1"
"Module type"
1)
Max value/min value info.
5 - 17