Mitsubishi Electric Melsec Q Series User Manual page 20

2
Single CPU system
Q00J/Q00/
Q01CPU
Multiple CPU system
Q02/Q02H/ Single CPU system
Q06H/ Q12H/
Q25HCPU Multiple CPU system
Single CPU system
Q02PH/
Q06PHCPU
Multiple CPU system
Q12PH/ Single CPU system
Q25PHCPU Multiple CPU system
Q12PRH/
Redundant System
Q25PRHCPU
Q00UJ/Q00U/ Single CPU system
Q01UCPU
Multiple CPU system
Q02U/Q03UD/
Single CPU system
Q04UDH/
Multiple CPU system
Q06UDHCPU
Q10UDH/ Single CPU system
Q20UDHCPU Multiple CPU system
Q13UDH/ Single CPU system
Q26UDHCPU Multiple CPU system
Q03UDE/
Single CPU system
Q04UDEH/
Q06UDEH/
Q13UDEH/
Multiple CPU system
Q26UDEHCPU
Q10UDEH/ Single CPU system
Q20UDEHCPU Multiple CPU system
CPU modules Single CPU system
other than the
Multiple CPU system
above
If installed in a MELSECNET/H remote
I/O station
2 - 2
(4) Supported software packages
Relation between the system containing the A/D converter modules and software
package is shown in the following table.
GX Developer or GX Works2 are necessary when using the A/D converter
module.
GX Developer
Version 7 or later
Version 8 or later
Version 4 or later
Version 6 or later
Version 8.68W or later
Version 7.10L or later
Version 8.45X or later
Version 8.78G or later
Version 8.48A or later
Version 8.78G or later
Version 8.62Q or later
Version 8.68W or later
Version 8.78G or later
Cannot be used
Version 6 or later
1: Refer to Appendix 1.2 for the combinations of the A/D converter module functions and GX
Configurator-AD software versions.
Software Version
1
GX Configurator-AD
Version 1.10L or later
(cannot be used with the
SW0D5C-QADU-E 50F
or earlier versions).
SW0D5C-QADU-E 00A
or later
SW0D5C-QADU-E 20C
or later
Version 1.13P or later
(cannot be used with the
SW0D5C-QADU-E 50F
or earlier versions).
Version 1.15R or later
Refer to the GX Works2
Version 2.05F or later
Cannot be used
SW0D5C-QADU-E 50F
or later
GX Works2
Version 1 Operating
Manual (Common).
2 - 2