Mitsubishi Electric Melsec Q Series User Manual page 81

5 UTILITY PACKAGE (GX Configurator-AD)
3)
QCPU
Q25HCPU
MODE.
RUN.
ERR.
USER.
BAT.
BOOT.
A
USB
RS-232
Figure 5.1 Correlation chart for data created with the utility package
5 - 8
(b) Text files
A text file can be created by clicking the Make text file button on the
initial setting, Auto refresh setting, or Monitor/Test screen. The text files can
be utilized to create user documents.
GX Developer/
GX Configurator-AD
Project
1)
A
2)
Steps 1) to 3) shown in Figure 5.1 are performed as follows:
1) From GX Developer, select:
[Project]
2) On the intelligent function module selection screen of the utility, select:
[Intelligent function module parameter]
parameters]
3) From GX Developer, select:
[Online]
module parameters"
Alternatively, from the intelligent function module selection screen of the
utility, select:
[Online]
Disk
Project
A
B
A : Intelligent function module parameters
B : Data saved by "Make text file"
[Open project] / [Save]/ [Save as]
[Read from PLC] / [Write to PLC]
[Read from PLC] / [Write to PLC]
MELSEC-Q
Personal computer
[Open parameters] / [Save
"Intelligent function
5 - 8