7
ONLINE MODULE CHANGE
7 - 28
(4) Operation check
(a)
To make an operation check, click the [Cancel] button to cancel control
resumption.
(b)
Click the [OK] button to leave the "Online module change" mode.
(c)
Click the [Close] button to close the System monitor dialog box.
(d)
Set the channels to be used to "A/D conversion enabled" in A/D conversion
enable/disable setting (buffer memory address 0: Un\G0) and turn on or off
Operating condition setting request (Y9). Monitor CH
(buffer memory address 11 to 18: Un\G11 to Un\G18) to check whether
proper conversion has been made.
MELSEC-Q
Digital output value
7 - 28