When User Range Setting Is Used And Initial Setting Was Made With Gx Configurator-Ad (Other System Is Unavailable) - Mitsubishi Electric Melsec Q Series User Manual

7 ONLINE MODULE CHANGE
MELSEC-Q
7.3.4 When user range setting is used and initial setting was made with GX Configurator-AD
(other system is unavailable)
(1) Conversion disable
(a) On the Operating condition setting screen of GX Configurator-AD, set
"Disable" in the Setting value field of CH A/D conversion enable/disable
setting, and click the [Execute test] button.
Monitor A/D conversion completed flag (buffer memory address 10:
Un\G10) and confirm that conversion has stopped.
7 - 19 7 - 19