Mitsubishi Electric Melsec Q Series User Manual page 105

5 UTILITY PACKAGE (GX Configurator-AD)
5 - 32
POINT
The initial setting/auto refresh setting of the intelligent function module can be
performed by each of the following methods.
(1) Set intelligent function parameters (Initial setting/Auto refresh setting) and write
them to the programmable controller CPU.
(2) Create an FB of the intelligent function module parameter (initial setting/auto
refresh setting) and paste it to the sequence program.
In accordance with the specification of the system, perform the initial setting/auto
refresh setting of the intelligent function module by one of the methods above.
1: The following explains the case in which both of (1) and (2) are performed.
(a) Initial setting
FB setting given in (2) is valid.
(b) Auto refresh setting
 Both (1) and (2) are valid.
 At the time of FB execution and in the END processing of the sequence
program, auto refresh is performed.
MELSEC-Q
1
5 - 32