Mitsubishi Electric Melsec Q Series User Manual page 142

7 ONLINE MODULE CHANGE
7 - 23
(c) Click the [Close] button to close the System monitor dialog box.
(d) On the pass data screen of GX Configurator-AD, set the prerecorded
values and perform User range writing request. (Refer to Section 5.6.5,
5.6.6)
(e) Monitor CH Digital output value (buffer memory address 11 to 18:
Un\G11 to Un\18) to check that proper conversion has been made.
MELSEC-Q
7 - 23