Mitsubishi Electric Melsec Q Series User Manual page 145

7 ONLINE MODULE CHANGE
7 - 26
(2) Dismounting of module
(a) After choosing [Diagnosis] - [Online module change] on GX Developer to
enter the "Online module change" mode, double-click the module to be
changed online to display the "Online module change" dialog box.
(b) Click the "Execution" button to enable a module change.
If the following error dialog box appears, the user range cannot be saved.
Click the [OK] button, and perform the operations described in Section
7.3.6 (2)(c) and later.
MELSEC-Q
7 - 26