Mitsubishi Electric Melsec Q Series User Manual page 61

4 SETUP AND PROCEDURES BEFORE OPERATION
4.2 Setup and Procedures before Operation
Module mounting
Mount the A/D conversion module in the specified
slot.
Wiring
Wire external devices to the A/D conversion module.
Intelligent function module switch settings
Perform settings using GX Developer
(refer to Section 4.5).
Offset/gain setting
Initial setting and auto refresh setting
The program can be simplified if the utility
package is used for setting (refer to Chapter 5).
Programming and debugging
Create and check the sequence program.
4 - 2
Start
Use user range settings?
Use user range settings
If user range settings are used, perform the
offset and gain settings (refer to Section 4.6).
Use the utility package?
YES
Use industrial shipment
settings.
NO
MELSEC-Q
4
4 - 2