5 UTILITY PACKAGE (GX Configurator-TI)
5.6 Monitoring/Test
5.6.1 Monitor/test screen
5 - 16
[Purpose ]
Start buffer memory monitoring/testing, I/O signal monitoring/testing, offset/gain
settings (refer to Section 5.6.2, 5.6.3) and pass data (refer to Section 5.6.4) from this
screen.
[Operating procedure]
"Select monitor/test module" screen
"Module model name"
1 Enter the start I/O No. in hexadecimal.
The screen can also be started from System monitor of GX Developer
Version 6 or later.
Refer to the GX Developer Operating Manual for details.
[Setting screen]
CH
Monitor/Test
"Start I/O No. "
Monitor/test
MELSEC-Q
1
"Module type"
Offset/Gain Setting
5 - 16
1)