Procedure For Starting Up The Ir.link System - Hitachi IR.LINK User Manual

4.1.2 Procedure for starting up the IR.LINK system

Mount the module.
Set the rotary switch.
Start up the IR.LINK
system.
Edit the IR.LINK system.
(1) Turn off the CPU or LPU power supply and install the
IR.LINK module.
(2) (a) Set Main/Sub with the module number setting
switch of the IR.LINK module. (0: Main,
1: Sub)
(b) Set the transmission rate for communication with
the BIT RATE switch of the IR.LINK module.
(0: 1 Mbps, 1: 0.5 Mbps, 2: 0.25 Mbps, 3: 0.125
Mbps)
(3) Connect the CPU or LPU to a Windows® PC and
start the IR.LINK system for S10mini or the IR.LINK
system for S10V. For details, see "4.2 Installing
and Starting Up the System."
(4) Edit the IR.LINK system. For details, see "4.2
Installing and Starting Up the System."
4-3
4 OPERATION