Figure 4-12 Ir.link System Information Receiving File Window; Figure 4-13 Ir.link System Information Receiving Completion Dialog Box - Hitachi IR.LINK User Manual

4 OPERATION
In "File name," enter the file name to save the system information of the IR.LINK module.
When a file is selected with the pointing device, the information is overwritten and saved in
the file.
A file comment input is optional and up to 128 characters can be entered.
"Save as type," "PCs number," "PCs type," "Date of creation," "File size" (file size after
saving), and "Address" (area of the IR.LINK module for saving) are automatically displayed.
The address varies depending on the IR.LINK module setting (main/sub). For module
setting, see "2.1 Names and Functions of Each Part."
Saving addresses when the module is set to Main: /A38008 to /A3FFFE
/0FF010 to /0FF01E
Saving addresses when the module is set to Sub: /AB8008 to /ABFFFE
/0FF030 to /0FF03E
(3) After completing the setting, click the Save button. (The system information of the
IR.LINK module is saved.) While the system information is saved, the IR.LINK System
Information Receiving file window (Figure 4-12) is displayed. When the file has been
received, the IR.LINK system information receiving completion dialog box (Figure 4-13) is
displayed. Click the OK button. To cancel the information, click the Cancel
button on the [Save As] window.

Figure 4-12 IR.LINK System Information Receiving File Window

Figure 4-13 IR.LINK System Information Receiving Completion Dialog Box

4-17