Closing The System; Figure 4-6 Ethernet Connection - Hitachi IR.LINK User Manual

(4) For Ethernet communication, click the "Ethernet" radio button and then enter the connection
destination "IP address." (See Figure 4-6.)
(5) After completion of setup, click the
Cancel button.
The S10mini Series does not support GP-IB. Do not select "GPIB" on the
communication type selection window.
The S10V Series does not support GP-IB. "GPIB" is not displayed on the
communication type selection window.

4.2.5 Closing the system

In the [IR.LINK SYSTEM] window (see Figure 4-2) or [ [S10V] IR.LINK SYSTEM] window
(see Figure 4-3), click the × button or

Figure 4-6 Ethernet Connection

OK button. To abort the setup process, click the
NOTICE
Close
4-9
button.
4 OPERATION