Figure 4-22 Error Multiple Counter Window - Hitachi IR.LINK User Manual

4 OPERATION
(3) Error multiple counter
Function: The error multiple counter of each station under the control of the IR.LINK
module is displayed.
Operation: The procedure is shown below.
(1) On the [Error information] window (Figure 4-19), click the
button.
The [Error multiple counter] window is displayed (Figure 4-22).
The error multiple counter is displayed for each station. The default "Station ID" is "01".
Change it by clicking the
When the Change station ID
into the Decide
to see the information and click the
of this station is displayed. If the specified station is invalid, the message dialog box "The
station ID is out of range. (/01 to /1F)" is displayed.
(2) To start monitoring, click the
monitoring status, click the
To exit the [Error multiple counter] window, click the
Note: During monitoring, the station ID cannot be changed.

Figure 4-22 Error Multiple Counter Window

Change station ID
button is clicked, the
button. Enter the station ID (01 to 1F) of the station for which you want
Decide
Start monitoring
Stop monitoring
button as required.
Change station ID
button, the [Error multiple counter] window
button. To stop monitoring in the
button.
Close
4-24
Error multiple counter
button changes
button.