Related Manuals for Hitachi CU-UHD4000-S7
Summary of Contents for Hitachi CU-UHD4000-S7
- Page 1 Additional Information CAMERA CONTROL UNIT CU-UHD4000-S7 OPERATING INSTRUCTIONS Please read these additional Information and operating instructions carefully for proper operation and keep them for future reference.
-
Page 2: New Functions
New Functions The camera control unit CU-UHD4000-S7 has the additional new functions to the standard model by connection with the SK-UHD4000-S7 and CA-UHF4000-S7. ● Two 12G-SDI outputs for 4K signal ●Simultaneous 2K SDR and 4K HDR signal outputs ●Independent 2K DTL function ●BT.2020 matrix function for 4K signal... -
Page 3: Facility Names And Functions (Rear)
Facility names and functions (Rear) 4K 12G OUTPUT connectors (BNC) 4K video signal is fed out through single BNC cable. 4K 3G OUTPUT connectors (BNC) Outputs 4K video signals. Each 4K video is mapped into four 3G-SDI/HD-SDI signals or two 3G-SDI signals. - Page 4 Facility names and functions (Rear) 4K 12G OUTPUT / 4K 3G signal output combinations Note-1: To use both 12G output and Quad output simultaneously, set Image Division to 2-Sample Interleave (2SI) and 3G-SDI Format to Level A (A) in OUTPUT SELECT menu in the CCU. Note-2: To use both 6G output and Dual/Quad output simultaneously, set Image Division to 2-Sample Interleave (2SI) and 3G-SDI Format to DUAL in OUTPUT SELECT menu in the CCU.
-
Page 5: Function Menu
Function menu New functions are in the additional menu. CCU MENU structure ■ＣＵ ＦＵＮＣＴＩＯＮ ＜＞ ■ＳＹＳ ＦＯＲＭＡＴ ＜ ■ＬＡＮ ＳＥＴＴＩＮＧ ＜＞ ■ＩＰ ＳＥＴＴＩＮＧ ＜ ＢＵＺＺＥＲ ：ＥＮＡＢＬＥ □５９．９４Ｈｚ ＩＰ ：１９２．１６８. １． １０ ＩＰ ：１９２．１６８. １． １０ ＳＤＩ ＡＵＤＩＯ ：ＯＦＦ □５０．００Ｈｚ ＣＯＮＦ＞：１９２．１６８. １． １０ ＳＥＮＤ ：１９２．１６８. １． １０ ＣＣＵ ＩＤ ： １ □２９．９７Ｈｚ ＳＵＢＮＥＴ ：２５５．２５５.２５５． ０ ＥＤＩＴ ＣＡＢＬＥ ＭＯＤＥ ：ＨＹＢＲＩＤ □２５．００Ｈｚ ＣＯＮＦ＞：２５５．２５５.２５５． ０ ＯＣＴＥＴ１：１９２ ＰＡＲＡ ＭＯＤＥ ：ＯＦＦ □２３．９８Ｈｚ ＧＡＴＥＷＡＹ： ０． ０. ０． ０ ２：１６８ ＳＹＳ ＦＯＲＭＡＴ ＞２１６０ｐ... - Page 6 Function menu 1. OUTPUT SELECT menu ■ＯＵＴＰＵＴ ＳＥＬＥＣＴ ＜＞ ４Ｋ ＯＵＴＰＵＴ ：２ＳＩ［Ａ］ ４Ｋ ＣＯＬＯＲ ：ＢＴ．７０９ ＨＤ１［１／２］ ：１０８０ｉ ＨＤ２［１／２］ ：１０８０ｉ ＷＦＭ／ＰＩＸ ：１０８０ｉ ＨＤ４［１／２］ ：１０８０ｉ ＣＵＴ－ＯＵＴ ＰＯＳＩＴＩＯＮ Ｈ ＰＨＡＳＥ ： ０ Ｖ ＰＨＡＳＥ ： ０ ＨＤ ＦＩＬＴＥＲ ：ＭＩＤ ＬＯＷ Item Setting Factory setting Description SYS FORMAT 59.94, 50.00 29.97, 25.00, 59.94, 50.00 29.97, 25.00, 23.98 23.98 4K OUTPUT SQD[B], 2SI[B], SQD[QUAD], 2SI[A]...
- Page 7 Function menu 3. KNEE/CLIP (HD) menu KNEE/CLIP (HD) menu is enabled only when setting simultaneous SDR and HDR are output. Item Setting Initial Description ■ＫＮＥＥ／ＣＬＩＰ（ＨＤ） ＜ setting ＊ＴＯＴＡＬ ＫＮＥＥ ： ２ TOTAL KNEE -128 to +127 2 Adjusts Total Knee level ＊Ｒ ＫＮＥＥ ： ０ ＊Ｂ ＫＮＥＥ ： ０ R KNEE -128 to +127 0 Adjusts R individual channel knee level...
-
Page 8: All Clear
Function menu 4. PIX DISPLAY [BARS] menu Item Setting Initial Description ■ＰＩＸ ＤＩＳＰＬＡＹ［ＢＡＲＳ］ ＜＞ setting ＣＡＭ ＩＤ ：ＯＮ CAM ID OFF, ON Displays Camera ID number on color ＣＡＭ ＩＤ ＳＵＢ ：＞ ＣＣＵ ＩＤ ：ＯＮ bars. ＣＣＵ ＩＰ ：ＯＮ CAM ID SUB Moves to CAM ID SUB menu. ＳＤＩ ＦＯＲＭＡＴ ：ＯＮ ＯＵＴＰＵＴ ：ＡＬＬ CCU ID OFF, ON Displays CCU ID on color bars. - Page 9 Function menu 6. COLOR BARS menu Item Setting Initial Description ■ＣＯＬＯＲ ＢＡＲＳ ＜＞ setting ＴＥＳＴ ＴＯＮＥ ：ＯＦＦ TEST TONE OFF, ON Audio test tone ON/OFF ＭＩＣ１［Ｌ］ ：１ＫＨｚ ＭＩＣ２［Ｒ］ ：１ＫＨｚ MIC1[L] 400Hz, 1KHz 1KHz Selects the test tone frequency for Lch. ＭＯＶＩＮＧ ：ＯＦＦ MIC2[R] 400Hz, 1KHz 1KHz Selects the test tone frequency for Rch.
-
Page 10: Specifications
Specifications ■ Input output signals (CU-UHD4000-S7) Camera Control Unit CU-UHD4000-S7 4K 12G OUTPUT 1/2 12G-SDI or 6G-SDI BNC x2 ・2 Sample Interleave division ・2 channels embedded audio available ･12G-SDI: SMPTE ST 2082-1 ・6G-SDI: SMPTE ST 2081-1 4K 3G OUTPUT 1/2/3/4... - Page 11 Camera Control Unit CU-UHD4000-S7 MIC OUT 1 0dBm/600Ω XLR-3pin MIC OUT 2 0dBm/600Ω XLR-3pin INTERCOM (HEAD SET) 0dBu MAX+15dB XLR-5pin(Female) Remote 1 1.5Vp-p 4pin Remote 2 1.5Vp-p 4pin Remote 3 RJ-45 COMMUNICATION D-sub 25pin 0dBm , 600Ω at 4Wire ・INTERCOM 0dBu or -15dBu ,200Ω...