Figure 4-21 Station Error Window - Hitachi IR.LINK User Manual

(2) Station error
Function: The error information of each station of the IR.LINK module is displayed.
Operation: The procedure is shown below.
(1) On the [Error information] window (Figure 4-19), click the
[Station error] window is displayed (Figure 4-21).
The error information is displayed for each station ID. When the station is normal or not
registered, the error code for this station ID appears as "/----." If any value other than the
above appears, this means that an error has occurred in this station. For the details of the
contents of station error codes, see "6.3 Errors and Countermeasures."
(2) To start monitoring, click the
monitoring status, click the
To exit the [Station error] window, click the

Figure 4-21 Station Error Window

Start monitoring
Stop monitoring
4-23
Station error
button. To stop monitoring in the
button.
Close button.
4 OPERATION
button. The