Figure 4-14 Open Window - Hitachi IR.LINK User Manual

4 OPERATION
(2) Transmission
Function: The IR.LINK system information saved by the "4.3.2 (1) Saving module information"
function is transmitted to the PCs.
Operation: The procedure is shown below.
(1) On the [F/D function] window (Figure 4-10), click the
(2) The [Open] window is displayed (Figure 4-14). Enter the file name or select (click) the file
name to be transmitted with the pointing device.
Only when a file is selected with the pointing device, "PCs number," "PCs type," "Date of
creation," "File size," "File comment," and "Address" of the IR.LINK system information
(file) to be transmitted are displayed.
Before transmitting the IR.LINK system information, make sure that the address of the
IR.LINK system information to be transmitted agrees with the address of the transmitting
destination. Transmit the IR.LINK system information saved when the module is set to
Main, to the IR.LINK module that is set to Main.

Figure 4-14 Open Window

4-18
Transmit button.