4 OPERATION
4.2.4 Changing connections
Function: Sets the communication type between the PCs and the PC.
Operation: The procedure is shown below.
(1) In the [IR.LINK SYSTEM] (see Figure 4-2) or [ [S10V] IR.LINK SYSTEM] (see Figure 4-
3) window, click the
(2) The [Communication type] window is displayed. ("GPIB" is not displayd for the [S10V]
IR.LINK SYSTEM.) (See Figure 4-4.)
(3) For RS-232C communication, click the "RS-232C" radio button and then select
"communication port." (See Figure 4-5.)
Change connection
Figure 4-4 Changing Connections
Figure 4-5 RS-232C Port Selection
4-8
button.