Mount Base; Mounting The Module; Figure 3-1 Mounting The Optional Module; Table 3-1 Mount Bases Applicable To The Ir.link Module - Hitachi IR.LINK User Manual

3 MOUNTING AND WIRING

3.1 Mount Base

This module can be mounted on the mount bases shown in Table 3-1.

Table 3-1 Mount Bases Applicable to the IR.LINK Module

Series Name
2-slot mount base
S10mini 4-slot mount base
8-slot mount base
4-slot mount base
S10V
8-slot mount base

3.2 Mounting the Module

Mount the optional module in an option slot (slot numbered between 0 and 7) in the mount base
as shown below:
Only one IR.LINK module can be installed.
For the S10mini series, install option modules from the leftmost slot so that the
I/O module may not exist between the CPU module and an option module and
any empty slot may not exist between the option modules.
For the S10V series, there is no constraint on the mounting position and empty
slot.
When installing the J.NET or J.NET-INT module and the IR.LINK module
simultaneously, install the IR.LINK module as the sub-setting. When
installing only the IR.LINK module, install it as the main setting.
Model
HSC-1020
HSC-1040
HSC-1080
HSC-1540
HSC-1580
Mount base
0 1 2 3 4 5 6 7
Power supply CPU or LPU
module module

Figure 3-1 Mounting the Optional Module

Power supply + CPU + 2 slots (optional, for I/O)
Power supply + CPU + 4 slots (optional, for I/O)
Power supply + CPU + 8 slots (optional, for I/O)
Power supply + LPU + 4 slots (optional, for I/O)
Power supply + LPU + 8 slots (optional, for I/O)
NOTICE
Option slots
Optional module
3-2
Specifications