Hitachi IR.LINK User Manual page 9

2. Hazard Warning Statements
The following are the hazard warning statements contained in this manual.
2.1 NOTICE Statements
(chapter 1, page 1-4)
Users of this product must have an adequate knowledge of the Windows®
environment and user interface. This system conforms to the Windows®
standard. This manual is prepared for users who are familiar with the basic
Windows® operating procedures.
(chapter 2, page 2-3)
Switch off the power supply before operating the module number setting switch
and bit rate setting switch.
If you operate while the power supply is applied, it may result in a malfunction.
(chapter 3, page 3-2)
Only one IR.LINK module can be installed.
For the S10mini series, install option modules from the leftmost slot so that the
I/O module may not exist between the CPU module and an option module and
any empty slot may not exist between the option modules.
For the S10V series, there is no constraint on the mounting position and empty
slot.
When installing the J.NET or J.NET-INT module and the IR.LINK module
simultaneously, install the IR.LINK module as the sub-setting. When
installing only the IR.LINK module, install it as the main setting.
NOTICE
NOTICE
NOTICE
S-6