Connecting Cables Between The Ups And The Smartli - Huawei UPS5000-H Series User Manual

UPS5000-H-(400 kVA-600 kVA)
User Manual (100 kVA Power Module)
Figure 6-11 Installing a signal cable
----End

6.3.3 Connecting Cables Between the UPS and the SmartLi

Prerequisites
If the SmartLi is configured, perform the following steps to connect cables.
Procedure
Step 1 Connect cables between the UPS and the SmartLi.
1.
2.
Issue 01 (2020-11-30)
Connect battery cables to the SmartLi or BBB box.
Connect the COM2 port on the monitoring interface card (MUS05A) in the
control module to the COM port on the master SmartLi cabinet.
NO TE
● The following figure uses the scenario with a BBB box configured as an example.
● The number and colors of cables are for reference only.
Copyright © Huawei Technologies Co., Ltd.
6 Installation
63