Bypass Module - Huawei UPS5000-H Series User Manual

UPS5000-H-(400 kVA-600 kVA)
User Manual (100 kVA Power Module)
Indicator
Alarm
indicator
Fault
indicator
Table 4-2 Specifications
Item
Rated output capacity
Dimensions (H x W x
D)
Weight

4.2 Bypass Module

The UPS works in bypass mode under the following circumstances:
●
●
●
●
●
Issue 01 (2020-11-30)
Color Status
Blinking
at short
intervals
Off
Yellow Steady
on
Off
Red Steady
on
Off
The ECO mode is used and the bypass voltage is within the specified range.
The power module overload times out.
Both active and standby energy control modules (ECMs) in the system are
abnormal.
The system runs abnormally.
The UPS is transferred to bypass mode manually.
Copyright © Huawei Technologies Co., Ltd.
Description
The module is not configured, the inverter
software and rectifier software are being
upgraded, or the inverter software is being
upgraded (blinking at 4 Hz, on for 0.125s and
off for 0.125s).
The software is being upgraded.
A minor alarm is generated for the inverter or
rectifier.
There is no minor alarm for the inverter or
rectifier, or the software is being upgraded.
A critical alarm is generated for the inverter or
rectifier.
There is no critical alarm for the inverter or
rectifier, or the software is being upgraded.
Specifications
100kVA/100kW
130 mm x 442 mm x 750 mm
< 55 kg
4 Component Description
27