UPS5000-H-(400 kVA-600 kVA)
User Manual (100 kVA Power Module)
Figure 5-1 Appearance
5.3 Backfeed Protection Card
When energy backfeed occurs, the backfeed protection card sends signals to
trigger alarm signals or quickly disconnect the feedback loop. The card is hot
swappable.
Figure 5-2 Appearance
5.4 Surge Protection Box
The surge protection box is used to improve the surge protection capability for the
UPS. It applies to a three-phase four-wire + PE power system.
Figure 5-3 Surge protection box
(1) Working status indicators
5.5 BCB Box
The BCB box controls the connection between battery strings and the UPS, and
supports overload protection, short circuit protection, and remote trip control.
Issue 01 (2020-11-30)
Copyright © Huawei Technologies Co., Ltd.
5 Optional Components
43