Checking Brake Pedal; Checking Brake Hose And Pipe - Kubota RTV400 Operator's Manual

56 PERIODIC SERVICE
BChecking Brake Pedal
To avoid personal injury:
A Stop the engine and chock the wheels before

checking brake pedal.

A If movement is outside of the specifications,
contact your local
adjusting the brake.
C Checking the brake pedal free travel
Proper brake pedal
free travel
1. Release the parking brake.
2. Slightly depress the brake pedal and measure free
travel at the top of the pedal stroke.
3. If brake pedal free travel is outside of the
specifications, contact your local KUBOTA Dealer for
adjusting the brake.
C Checking the brake pedal stroke
Pedal stroke
1. Release the parking brake.
2. Step on the pedal and measure the pedal stroke.
3. If brake pedal stroke is outside of the specifications,
contact your local KUBOTA Dealer for adjusting the
brake.
(1) Brake pedal
KUBOTA Dealer
7 to 14 mm (0.3 to 0.6 in.)
on the pedal
Less than 65 mm (2.56 in.)
on the pedal
(A) "FREE TRAVEL"
(B) "PEDAL STROKE"
BChecking Brake Hose and Pipe
1. Check to see that brake hose and pipe are not swollen,
hardened or cracked.
2. Check the brake hose and pipe joints for oil leaks.
3. If there is any abnormality, consult your local KUBOTA
Dealer for this service.
for
(1) Brake pipe
(1) Brake hose (Front)
(1) Brake hose (Rear)