Table of Contents
Advertisement
ROBOTICS VERO
Steps
6.
NOTE: While the Service Brake Release button is pressed, Robotics Vero does not react to any
drive command from ExacTrac Vero.
NOTE: After activating the Service Brake Release a homing procedure is required before the
device can be used clinically. Please refer to page 31.
Hardware User Guide Rev. 1.1 Robotics Vero Ver. 2.1
Disconnect the Auxiliary Power Supply.
• Hold the cable with one hand and release the engaging teeth by pulling the spring-load-
ed sleeve outwards:
Take care when unplugging the charger plug from Robotics Vero.
• If the spring-loaded sleeve is not pulled back, teeth protrude:
• if the spring-loaded sleeve is pulled back, the teeth retract:
NOTE: Robotics Vero cannot be maneuvered if the Auxiliary Power Supply is connect-
ed. You must unplug the Auxiliary Power Supply before patient treatment.
41
- Quick Links:
- Robotics Vero Hardware
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ROBOTICS VERO and is the answer not in the manual?
Questions and answers