Maneuvering Robotics Vero During Non-Patient Operation - Brainlab ROBOTICS VERO Hardware User's Manual

ROBOTICS VERO
2.3.2

Maneuvering Robotics Vero During Non-Patient Operation

General Information
For service purposes only, Robotics Vero may be maneuvered during non-patient operation
using the Robotics Service Application.
This operating mode is restricted only to Brainlab Support personnel.
Do not use the Robotics Service Application for the purpose of patient setup before and
during radiation treatment.
Robotics Service Application: Default View
Steps
1.
2.
Hardware User Guide Rev. 1.1 Robotics Vero Ver. 2.1
Before starting:
During non-patient operation any maneuvers of Robotics Vero are solely controlled using
the ET Hand Pendant.
The ET Hand Pendant must be set up directly beside Robotics Vero in the treatment
bunker to have an unobstructed view to Robotics Vero during maneuvering.
Starting the Robotics Service Application:
A message is displayed as a reminder not to use the application for patient setup. Click
Acknowledge to proceed.
27