Brainlab ROBOTICS VERO Hardware User's Manual page 40

Maintaining the System
How to use the Service Brake Release
Steps
1.
2.
3.
4.
5.
40
Connect the Auxiliary Power Supply to Robotics Vero.
• Connect it to supply mains using the appropriate mains power cable (country-specific
power cord).
• Connect the Auxiliary Power Supply with its power output cable to Robotics Vero.
Remove the white plastic cap covering the Service Brake Release.
Insert a long thin object (e.g a needle) into the hole, and press the Service Brake Re-
lease button behind the cover.
If the button is released, the drive brakes will re-engage. Two people must perform this
manual tilt, one to hold the button pressed and the second to manually shift the couch top
into the correct position.
When in the correct position, release the button to engage the drive brakes. Insert the
plastic cap again to cover the hole.
Hardware User Guide Rev. 1.1 Robotics Vero Ver. 2.1