Saving A File With "File - Sharp MX-B382 Operation Manual

SAVING A FILE WITH "File"

When copying, printing or transmitting a document in copy mode, print mode, or image send mode (excluding USB
memory scan mode), "File" can be selected to save an image of the document to the Main folder or a previously created
custom folder. The image can be retrieved at a later time, allowing you to print or transmit the document without having
to locate the original.
As an example, the procedure for using "File" while copying is explained below.
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
After placing the original, specify the original size.
Copy mode:
☞
1
SPECIFYING THE ORIGINAL SIZE
Fax mode:
☞
SPECIFYING THE SCAN SIZE AND SEND SIZE
Scanner/Internet Fax mode:
☞
Specifying the send size of the image
Exposure
2
Auto
Copy Ratio Original
100%
File Information
Confidential
Password
User Name User Unknown
File Name Copy_04042010_112030
3
Stored to: Main Folder
(page 2-29)
(page 5-62)
Special Modes
2-Sided Copy
Plain
A4
Output
A4
1.
A5
2.
File
A4
3.
A4
4.
Quick File
Paper Select
Auto
A4
Plain
(1) (2)
Cancel OK
(page 4-47)
Touch the [File] key.
Select the "File" settings.
(1) Select file information settings.
To select the user name, file name, folder, and
confidential setting, see
6-15).
• Specifying a user
• Assigning a file
• Specifying the
• Storing a file as a confidential
After configuring the above settings, you will return to this
screen. Go to the next step.
If you do not wish to assign a user name or other
information to the file, go to the next step.
(2) Touch the [OK] key.
You will return to the base screen of copy mode and the
[File] key will be highlighted.
6-13
DOCUMENT FILING
"FILE INFORMATION" (page
name: (page 6-15)
name: (page 6-16)
folder: (page 6-16)
file: (page 6-17)
Contents