Sharp MX-B382 Operation Manual page 425

When placing the original on the document glass, follow the procedure
below.
Turn the card over so that the back is face down, and press the [START] key to
scan the back of the card.
6
Before scanning the back of the card, you can touch the [Configure] key in the touch panel to change the exposure.
To cancel scanning...
Press the [STOP] key (
Place next original.
Press [Start].
When finished, press [Read-End].
7
If you will continue scanning additional cards, you can touch the [Configure] key to change the exposure, resolution,
scan size, and send size.
• The ratio cannot be specified and "Rotation Sending Setting" cannot be selected.
• This function cannot be used in direct transmission mode or when the speaker is used to dial.
To cancel Card Shot...
Touch the [Cancel] key in the screen of step 4.
).
(Pg.No.x)
Configure Read-End
4-81
Touch the [Read-End] key.
FACSIMILE
Contents