Automatic Document Feeder And Document Glass - Sharp MX-B382 Operation Manual

AUTOMATIC DOCUMENT FEEDER AND DOCUMENT
GLASS
Automatic document feeder (MX-B382)
(1)
Automatic document feeder (MX-B382SC)
(1)
(1) Paper feed roller
This roller rotates to automatically feed the original.
(2) Document feeding area cover
Open this cover to remove an original misfeed or clean
the paper feed roller.
☞
8. TROUBLESHOOTING
(page 8-10)
(3) Original guides
These help ensure that the original is scanned correctly.
Adjust the guides to the width of the original.
☞
PLACING THE ORIGINAL
(4) Original exit tray
Originals are delivered to this tray after scanning.
(5) Document feeder tray
Place originals in this tray. 1-sided originals must be
placed face up.
☞
PLACING THE ORIGINAL
(2) (3)
(8) (2)
"REMOVING MISFEEDS"
(page 1-37)
(page 1-37)
1-6
BEFORE USING THE MACHINE
(4) (5)
(3) (9) (5)
(6) Scanning area
Originals placed in the document feeder tray are scanned
here.
(7) Document glass
Use this to scan a book or other thick original that cannot
be fed through the automatic document feeder.
☞
PLACING THE ORIGINAL ON THE DOCUMENT
GLASS (page 1-41)
(8) Document exit area cover
open this cover to remove an original misfeed.
(9) Original exit tray 1
Originals are delivered to this tray after scanning.
(10) Original exit tray 2
If originals are not delivered to original exit tray 1 after
scanning, they are delivered to this tray.
(6) (7)
(10) (6) (7)
Contents