Copying Sequence; Basic Copy Settings - Sharp MX-B382 Operation Manual

COPYING SEQUENCE

This section explains the basic procedure for copying. Select settings in the order shown below to ensure that the copy
operation takes place smoothly.
For detailed procedures for selecting the settings, see the explanation of each setting in this chapter.
Place the original in the automatic document feeder tray, or on the document glass.
Place the original in the automatic document feeder.
☞
PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT FEEDER
* Depending on the copy functions used, there are also cases where functions are selected before the original is placed.
Exposure
Auto
Copy Ratio Original
100%
2-Sided Copy
Place the original.

Basic copy settings

Special Modes
2-Sided Copy
Plain
A4
Output
1. A4
A5
2.
File
A4
3.
A4
4.
Quick File
Paper Select
Auto
A4
Plain
2-sided copy settings
OK
(page 1-37)
Select the basic copy settings.
The main settings are as follows:
• Exposure and original type
EXPOSURE AND ORIGINAL IMAGE TYPE
☞
• Copy ratio REDUCTION/ENLARGEMENT/ZOOM
(page 2-25)
☞
• Original size ORIGINAL SIZES
☞
• Paper Settings PAPER TRAYS
Select settings as needed for 2-sided copying and 2-sided
scanning of the original.
☞
AUTOMATIC 2-SIDED COPYING
2-6
COPIER
☞
CHANGING THE
(page 2-23)
(page 2-29)
(page 2-11)
(page 2-17)
Contents