Sharp MX-B382 Operation Manual page 183

Digital multifunctional system

Hide thumbs Also See for MX-B382:

Table of Contents

Original Image Type

Guidelines for the exposure level when [Text] is selected:

1 to 2: Dark originals such as a newspaper

Normal density originals

4 to 5: Originals written in pencil or light coloured text

Original Image Type

• If [Auto] is selected but the darkness or lightness of the image does not seem quite right...

If the image seems too light or too dark when [Auto] is selected, the exposure level can be adjusted using "Copy Exposure

Adjustment" in the system settings (administrator).

• To change the resolution...

When making a full-size copy, you can press the [Scan Resolution] key to select the scanning resolution. The numbers

that allow selection of the document glass are different from the numbers that allow selection of the automatic document

• System Settings (Administrator): Initial Status Settings (Exposure Type)

This is used to change the default original image type.

• System Settings (Administrator): Copy Exposure Adjustment

The exposure level used for automatic exposure adjustment can be adjusted.

• System Settings (Administrator): 600dpi x 600dpi Scanning Mode for Document Feeder / Quick Scan from

Document Glass

The default resolution setting can be changed.

Adjust the exposure level.

key to make the copy darker.

key to make the copy lighter.

Touch the [OK] key.

Chapters

Table of Contents