Using The Automatic Document Feeder For Transmission - Sharp MX-B382 Operation Manual

USING THE AUTOMATIC DOCUMENT
FEEDER FOR TRANSMISSION
This section explains how to use the automatic document feeder to send a fax.
MX-B382:
Indicator
line
MX-B382SC:
1
When sending a multi-page fax, the automatic document feeder and the document glass cannot both be used to scan
the original pages.
5 10 15 To
Condition
Settings
AAA AAA
Address Review
CCC CCC
Address Entry
EEE EEE
Global
GGG GGG
Address Search
2
Sub Address III III
Freq.
Sort Address
In addition to specification by one-touch key, a destination can also be specified using a search number. You can also
directly enter a fax number with the numeric keys or look up a destination in a global address book. For more
information, see
Press the [START] key.
Scanning begins.
When scanning is completed, the machine sounds a beep.
3
When scanning is completed, "Job stored." will be displayed together with a job control number. This number can be
used to locate the job in the Transaction Report or in the Image Sending Activity Report.
Indicator
line
(2)
Cc
BBB BBB
DDD DDD
FFF FFF
HHH HHH
JJJ JJJ
ABCD EFGH IJKL MNOP QRSTU VWXYZ
Auto Reception
Fax Memory:100%
"ENTERING DESTINATIONS" (page 4-16).
Place the originals face up in the
document feeder tray with the edges
aligned evenly.
Insert the originals all the way into the document feeder tray. Multiple
originals can be placed in the document feeder tray. The stack of
originals must not be higher than the indicator line on the tray.
When the original is a different size than the size setting, set
the original size.
☞
SPECIFYING THE SCAN SIZE AND SEND SIZE
Enter the destination fax number.
(1) Touch the [Address Book] key in the base
screen.
1
For the [Address Book] key, see
2
FAX MODE" (page 4-8).
(2) Touch the one-touch key of the desired
destination.
etc.
4-30
FACSIMILE
(page )
4-47
"BASE SCREEN OF
Contents