Card Settings; Card Reader Device Registration - Sharp MX-B382 Operation Manual

Digital multifunctional system

Hide thumbs Also See for MX-B382:

Table of Contents

Resetting user counts

Select a user in the setting screen and touch the [Reset] key. A count reset screen for that user will appear.

The reset screen will vary depending on whether a single user or multiple users were selected. The items displayed in

each case are described in the table below.

When a single user is selected

Clear All Counts

When multiple users are selected

Clear All Count

Card Settings

(when the HID card reader is enabled.)

Configure this setting if user authentication will be performed using a Sharp OSA external authentication application and

an HID card.

In this setting, the product ID and vender ID of the connected HID card reader are displayed. To store the HID card

reader, touch the [Read] key.

* For settings that enable an HID card to be used, consult your service technician.

This shows the next user (in the order of the registration numbers).

This shows the previous user (in the order of the registration numbers).

The counts and the number of pages remaining of the selected user are shown by function.

Reset the count of the selected item to "0".

Reset all items of the selected user to "0".

The counts and the number of pages remaining of the selected users are shown by function.

Reset the count of the selected item to "0".

Reset all items of the selected users to "0".

SYSTEM SETTINGS

Table of Contents