Sending A Fax In Internet Fax Mode - Sharp MX-B382 Operation Manual

SENDING A FAX IN INTERNET FAX MODE

The basic procedure for sending a fax in Internet fax mode is explained below. This procedure can also be used to
perform direct transmission by Direct SMTP.
When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be
changed, the destination cannot be changed, and destinations cannot be added. To switch to Internet fax mode, touch the
[Cancel] key in the touch panel and follow the steps below.
For the MX-B382SC, when "Default Address Setting" is set to "Apply E-mail address of the user for login.", pressing the [Add
Address] key on the touch panel switches modes and adds addresses.
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
☞
PLACING THE ORIGINAL
• Image rotation
A5 (5-1/2" x 8-1/2") or B5 size original in landscape orientation will be rotated 90 degrees and transmitted as an A5
(5-1/2" x 8-1/2") or B5 image in portrait orientation.
1
• Originals cannot be scanned in succession from both the automatic document feeder and the document glass and
sent in a single transmission.
System Settings (Administrator): Rotation Sending Setting
This is used to select whether or not a scanned original image is rotated before transmission.
Initially a B5 landscape original is set to be rotated and sent as a B5 portrait image, and an A5 (5-1/2" x 8-1/2")
landscape original is set to be rotated and sent as an A5 (5-1/2" x 8-1/2") portrait image.
(4) (3)
5 10 15 To
Condition
Settings
AAA AAA
Address Review
CCC CCC
Address Entry
EEE EEE
Global
GGG GGG
Address Search
III III
Freq.
2
Sort Address
• After a one-touch key is touched, if the screen is changed without touching the [To] key, the destination is
automatically specified.
• In addition to specification by a one-touch key, a destination can also be specified by a search number. You can
also manually enter a destination or look up a destination in a global address book. For more information, see
"ENTERING
(page 1-37)
(2)
Cc
BBB BBB
DDD DDD
FFF FFF
HHH HHH
JJJ JJJ
ABCD EFGH IJKL MNOP QRSTU VWXYZ
Auto Reception
Fax Memory:100%
DESTINATIONS" (page 5-18).
Transmission
Specify the destination.
(1) Touch the [Address Book] key in the base
screen.
1
For the [Address Book] key, see
2
5-9).
(2) Touch the key of the desired destination.
The icon appears in one-touch keys in which Internet
fax addresses are stored.
etc.
(3) Touch the [To] key.
The destination is specified.
(4) Touch the [Condition Settings] key.
5-42
SCANNER/INTERNET FAX
"BASE SCREEN" (page
Contents