Automatically Scanning Both Sides Of An Original (2-Sided Original) - Sharp MX-B382 Operation Manual

AUTOMATICALLY SCANNING BOTH SIDES OF AN
ORIGINAL (2-Sided Original)
The automatic document feeder can be used to automatically scan both sides of an original.
Select the mode and display the image settings screen.
(1) Touch the tab of the mode that you wish to use.
1
(2) Touch the [Original] key.
☞
IMAGE SETTINGS
Scan/Original
Scan Size
A4
2-Sided
2-Sided
Booklet Tablet
2
(1)
To cancel 2-sided scanning, touch the highlighted key so that it is no longer highlighted.
2-sided scanning automatically turns off after the transmission operation is completed.
Scan transmission
2-sided original
(page 5-54)
(3)
OK
Send Size
100%
Auto
Image Orientation
(2)
Front and reverse sides are scanned
Specify the binding style of the 2-sided
original (book or tablet) and the
orientation in which the original is placed.
(1) Touch the [2-Sided Booklet] key or the
[2-Sided Tablet] key.
A book and a tablet are bound as shown below.
Book
A
C
(2) Touch the appropriate [Image Orientation] key.
If this setting is not correct, a suitable image may not be
transmitted.
(3) Touch the [OK] key.
5-55
SCANNER/INTERNET FAX
Tablet
J
A B
E F
L
K L
Contents